Fiber Abrasives

View as Grid List
Sort by
Display per page

Scotch-Brite Wheels

These wheels are made of soft double ply Scotch-Brite and easily conform to surface contours. Removes a small amount of metal while producing a satin finish. Measure approximately 7/8" diameter on 3/32" stainless steel shank. Maximum speed: 10,000rpm.
Call us at +962 6 582 6330 for price

Mounted Flexible SLP Fiber Wheel

Details A flexible yet firm unitized abrasive mounted wheel made of 180 grit pure alumina. Produces a fine, smooth finish. Measures 7/8" diameter x 1/8" thick. 3/32" stainless steel shank.
Call us at +962 6 582 6330 for price

Hard FR Fiber Wheel, 3/32" Shank

Details For aggressive stock removal, this wheel is ideal. It has only slight resilience and cuts fast! Made of silicon carbide embedded in a fiber carrier. Measures 1" diameter x 1/4" thick on a 3/32" shank. Consult ANSI for maximum operating speel.
Call us at +962 6 582 6330 for price

SX Mounted Polishers, 7-Piece Intro Pack

Call us at +962 6 582 6330 for price

SX Mounted Polishers

Call us at +962 6 582 6330 for price

Mounted Satin Finish Wheels 7/8", Intro Pack

Call us at +962 6 582 6330 for price

Scotch-Brite EXL Large 6" Wheel, Medium Grit

Call us at +962 6 582 6330 for price

Sponge Sanding Pads (Set of 5)

Call us at +962 6 582 6330 for price

Satin Finish Buffs, 4"

Call us at +962 6 582 6330 for price

Unitized Mounted Points - 1/8" Shank

Details Unitized Mounted Point – Fine, Medium & Coarse Available in 6 different shapes and 2 compositions, they are used in a variety of deburring, blending, finishing and polishing applications. Conform to workpieces for consistent, uniform finishing without undercutting or gouging. Consist of durable unitized material embedded with silicon carbide or aluminum oxide grit. The silicon carbide is a fine/soft composition, requiring very little pressure. It is moderately conformably and provides high luster. The aluminum oxide with the medium composition requires heavy pressure and aggressive cutting. The aluminum oxide with the coarse composition requires the heaviest pressure and offers the most aggressive cutting including light deburring. Unitized Mounted Points are constructed of pressed, non-woven tough abrasive nylon fibers, used primarily in finishing and surface preparation along with light deburring. These points are designed to provide long-life, are non-loading and will not unwind. They run smooth which eliminates “chatter” marks created by bonded abrasives. All on 1/8" shanks.
Call us at +962 6 582 6330 for price

Fiber Flap Wheels on 1/4" Shank

Call us at +962 6 582 6330 for price